No products in the basket.

No products in the basket.

The Ultimate Dubbing Station

 

All in One set of tools, that allow you to create your own mix of any music

Play, dub, and reshape your music, without the need for stems or individual tracks

Punch in FX accurately, directly on instruments or vocals.

Use the DubFilter to create resonant frequency sweeps.

Mute and  drop in the audio from the 4 bands (Isolators) to create build ups and drop outs

Add sounds from our Dub Siren and 12 slot Sample player

Rewind and replay the audio with one touch, then  Dub it again !

Watch the demos with headphones or big speakers
Watch the demos with headphones or big speakers
4 Way Isolator

4-Way isolator with Kill Switches to cut out or boost any group of frequencies: sub-bass, bass, mids, and tops. Fully adjustable frequency cutoff, Q factor, gain (+12dB), and VU meters for each band.

Dub Siren

A complete Dub Siren powered by 2 independent LFOs, tone control, echo send, and a bitcrusher with sample rate and bits controls,

Tape Echo Emulation

Inspired by the legendary HH Slider Tape Echo.  Isolate any instrument or sound, on the fly, and blend it back into the music seamlessly.

Reverb Processor

Get that spring reverb flavour with our custom-built Reverb Processor, complete with damping and room control.

Resonant Filter

Amp FreQQ v2 features a unique high-pass and low-pass resonant dub filter. It is controlled and triggered by a single knob, plus a slider to adjust the Q factor.

Graphic & Parametric EQ

Enter a world of absolute frequency sculpting and get the best of your sound by mastering the use of this EQ power-couple

Sample Player

12 Slots (momentary and hold)

Session Recorder

Wav/Aiff master output recording

Real Rewind

With adjustable length

MIDI Compatible

Fully mappable interface

Sample Player

12 Slots (momentary and hold)

Session Recorder

Wav/Aiff master output recording

Real Rewind

With adjustable length

MIDI Compatible

Fully mappable interface

Dub Everything

You can play music from any source:
Local files

Our twin deck system (with dedicated playlists) can play mp3, m4a, wav & aiff files.

External

Plug in a turntable, a CD player, a microphone… Anything. If you can plug it, you can dub it.

Internal

Send the sound from any DAW, DJ software, or even from a web browser, into Amp FreQQ v2.

Dub Everything

You can play music from any source:
Local files

Our twin deck system (with dedicated playlists) can play mp3, m4a, wav & aiff files.

External

Plug in a turntable, a CD player, a microphone… Anything. If you can plug it, you can dub it.

Internal

Send the sound from any DAW, DJ software, or even from aweb browser, into Amp FreQQ v2.

Keyboard Control

The most important controls are pre-mapped to the keyboard 
for precise and instant operation.

MIDI Control

You can use any MIDI controller. We chose the Midimix controller from Akai and assigned the most used controls, whilst enabling functionality of the LEDs. We also created beautiful overlays with all the controls clearly marked
Our custom overlays have been designed to maximize the use of Amp FreQQ’s main features. They are made of waterproof and tearproof synthetic paper, professionally printed and laser cut to fit the Akai Midimix perfectly.

Endless Combinations

Adaptable to any setup: with or without an audio interface, speakers, or headphones.

home setup

SAVE MANY THOUSAND

Amp FreQQ was developed in the tradition of an old school sound system control tower. Coming in many shapes and forms, these enigmatic setups comprise sound processors, effects units, a preamp, speaker management systems, and all sorts of sound generators (like the worldwide renowned Dub Siren). These sound system pioneers and their techniques laid the foundation upon which many Bass Music genres and styles were built, and today they continue evolving and reshaping the sound system culture.

But… To acquire and maintain such a complex array of hardware is not only time-consuming but also quite cumbersome and expensive.

* This estimate was made based on real products on the lower side of the pricing spectrum.

FULL FEATURE LIST

4 Way isolator

  • Fully adjustable frequency cutoff, Q factor, gain (+12dB), and VU meters for each band.
  • FX, dub siren, microphone, and sample player bypass and go straight to master.

Play any source

  • Twin digital deck players (mp3, m4a, wav, aiff and flac) with rewind (adjustable length) and auto-repeat.
  • Playlist save & load, playbar browse & cue (MIDI mappable).
  • Audio inputs for any source, e.g. turntable*, CD player, cassette tape, mobile phone, streaming services, DAW and DJ software**.
  • Additional audio inputs for sources such as microphone, dub siren, synth drum, instruments, with independent FX sends.

FX

  • Tape echo modeled on the classic HH Slider tape echo. Full control over feedback, time and tape saturation. Custom band pass filter with sweep and Q factor control.
  • Reverb processor with extended control over room, high frequency damping and gain levels. Custom band pass filter with sweep and Q factor control.
  • Unique punch in FX operation based on momentary triggers allows for accurate timing and delivery.

Dub filter

  • Switchable HP/LP, one-knob style resonant filter with 3 different routing options: A) Only on music source, B) On master output, C) On samples only. One of a kind dubwise implementation.
  • Q Factor control for extended resonant sound-shaping.

Equalizers 

  • In addition to the extra gains available on the killer bands, a further 4 band parametric EQ (dynamic readings of frequency cutoff) with +/-24 dB
  • 10 Band graphic EQ with +/-10 dB.
  • EQ routing selector allows for any combination of the above. 45 Hz cut switch.

Session recorder

  • Wav/Aiff master output recording.

Limiters

  • Dedicated adjustable limiters for master, reverb and echo.

Dub siren

  • Pitch control.
  • Dual LFO (sine and square waveform) with dedicated rate and depth controls.
  • Echo send level.
  • 12 Slot preset selector with save & load sets.
  • Bitcrusher and sample rate.

Sampler player

  • 12 Slot (momentary and one-shot play).
  • Effects send level.
  • High pass filter.
  • Clear all samples button.

MIDI

  • Fully mappable. Every parameter on screen can be assigned to one or several controls on one or more MIDI controllers. One or more parameters can be mapped to a single control.
  • Custom integration with Akai MidiMix including LED feedback.
  • Compatible with any class-compliant MIDI controller.
  • Save & load MIDI configuration and mappings.
  • Re-scan function.
  • Controller list display.

User modes

  • Safe mode (killer frequencies and gains are restricted to usables ranges, as are FX and dub filter). Simplified interface.
  • Advanced mode is unrestricted and displays full interface.

Keyboard control

  • The most important controls are pre-mapped for precise and instant operation.
  • Browse through playlists, load & play songs.
  • Forget about trackpad or mouse. Perfectly usable without MIDI controller.

Spectrum analyzer and customization

  • FFT Spectrum analyser displays master signal.
  • Linear or Logarithmic options.
  • 3 Way selector to choose from Spectrum display, EQ’s or Static image.
  • Use your own logo or image to overlay the Spectrum and choose a background colour for the entire UI, using the colour picker in setup.

* Phono amplification / RIAA correction may be needed (audio interface, dj mixer or phono stage).

** Third party software required  such as Soundflower (Mac) or VB HIFI Cable (Windows).